TPA6204A1DRBR
| Parameters | |
|---|---|
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.7W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6204 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 6mA |
| Power Dissipation | 2.7W |
| Max Supply Current | 6mA |
| Quiescent Current | 4mA |
| Output Power | 1.7W |
| Common Mode Rejection Ratio | 63 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -80dB |
| Max Output Power | 1.7W |
| Max Output Power x Channels @ Load | 1.7W x 1 @ 8 Ω |
| Load Impedance | 8Ohm |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
TPA6204A1DRBR Overview
Amp parts is embedded in the 8-VDFN Exposed Pad package.In this case, it is packaged as Tape & Reel (TR) .The 8 termination refers to terminating transmission lines with devices that match their characteristic impedance.Output 1-Channel (Mono) is configured for this device.The device belongs to the Class AB type of electrical devices.8 pins are pronged contacts on a computer or other communication device that form a signal interface.In this case, the electronic part is mounted in the way of Surface Mount .Electrical devices like this one have a 2.5V~5.5V supply voltage.This device is equipped with a total of 1 channels.Ensure that Depop, Differential Inputs, Shutdown, Thermal Protection is maintained when operating.The operating temperature should not exceed -40°C~85°C TA .There are 8 pins on this device.Amp parts is included in Audio/Video Amplifiers .The TPA6204 family includes it.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 1.7W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.5V .5.5V is the maximum supply voltage (Vsup).This electronic part has a Single supply type.This device runs on a power supply of 3/5V volts.As long as external factors do not affect it, it consumes 4mA of quiescent current.
TPA6204A1DRBR Features
8-VDFN Exposed Pad package
8 pin count
TPA6204 family
1.7W kWh per hour
TPA6204A1DRBR Applications
There are a lot of Texas Instruments TPA6204A1DRBR audio amplifiers applications.
- Medical imaging
- Power transmission
- Instrumentation
- High-frequency data acquisition systems
- Proportional operation circuits
- Power control
- Multiplication and division circuits
- single/dual op amp sum and difference circuits
- Inverse/same-phase proportional circuit
- Vehicle electronics