TPA6111A2DGNRG4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6111 |
| Pin Count | 8 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 3.2mA |
| Power Dissipation | 2.14W |
| Output Power | 150mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Output Power | 150mW |
| Max Output Power x Channels @ Load | 150mW x 2 @ 16 Ω |
| Harmonic Distortion | 0.1% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6111A2DGNRG4 Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is embedded.The device is in the form of Tape & Reel (TR) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.The output it is configured with uses Headphones, 2-Channel (Stereo) .In terms of electrical devices, it belongs to the type Class AB .In a computer or other communications device, 8 pins are pronged contacts.This electronic part is mounted in the way of Surface Mount .In this electrical device, the supply voltage is 2.5V~5.5V .This device is equipped with a total of 2 channels.During operation, Depop, Short-Circuit and Thermal Protection, Shutdown can be ensured.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.A total of 8 pins are present in it.Audio/Video Amplifiers contains it.Amp parts belongs to TPA6111 family.There is a maximum output power of 150mW kWh per hour from this electronic component.During this time, the maximum supply voltage (Vsup) reaches 5.5V volts.There is a supply type of Single for this electronic part.Amp parts operates from a 3.3/5V power supply.
TPA6111A2DGNRG4 Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA6111 family
150mW kWh per hour
TPA6111A2DGNRG4 Applications
There are a lot of Texas Instruments TPA6111A2DGNRG4 audio amplifiers applications.
- Displayers for aircraft and air transportation control systems
- Signal filtering
- Automotive sensors
- Signal amplification
- Proportional counter tubes
- Medical imaging
- pH (acidity)
- Inverse/same-phase proportional circuit
- Power control
- Multiplication and division circuits