TPA6110A2DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6110 |
| Pin Count | 8 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 3mA |
| Power Dissipation | 2.14W |
| Max Supply Current | 3mA |
| Output Power | 150mW |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 83dB |
| Max Output Power | 150mW |
| Max Output Power x Channels @ Load | 150mW x 2 @ 16 Ω |
| Harmonic Distortion | 0.1% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6110A2DGNR Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is embedded.Chips should be packaged in Tape & Reel (TR) cases.8 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts is configured to produce Headphones, 2-Channel (Stereo) as Amp partss output.This electrical device has the type Class AB .In a computer or other communication device, there are two pronged contacts called 8 pins.Electronic parts are mounted in the way of Surface Mount .Its supply voltage is 2.5V~5.5V volts.The number of channels is growing strong/weak: 2 .Amp parts is possible to guarantee Depop, Short-Circuit and Thermal Protection, Shutdown when operating.There should be no temperature increase above -40°C~85°C TA .A total of 8 pins are present on the device.Audio/Video Amplifiers incorporates this part.Amp parts is part of the TPA6110 family.There is a maximum output power of 150mW kWh per hour from this electronic component.5.5V is reached as the maximal supply voltage (Vsup).Amp parts is an electronic part wAmp partsh a supply type of Single .The system is powered by a 3.3/5V battery.
TPA6110A2DGNR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA6110 family
150mW kWh per hour
TPA6110A2DGNR Applications
There are a lot of Texas Instruments TPA6110A2DGNR audio amplifiers applications.
- High speed sample
- Active probe
- Semiconductor detectors
- Displayers for aircraft and air transportation control systems
- Vehicle electronics
- Portable electronic products powered by batteries
- Signal amplification
- pH (acidity)
- Power control
- Proportional operation circuits