TPA311DGN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA311 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 2.14W |
| Max Supply Current | 1.5mA |
| Quiescent Current | 700μA |
| Output Power | 350mW |
| Supply Type | Single |
| Bandwidth | 10 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Load Impedance | 8Ohm |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA311DGN Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is embedded.Amp parts is recommended that the chip be packaged in the case Tube .8 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.Amp parts is configured wAmp partsh an output of 1-Channel (Mono) .Amp parts is an electrical device of type Class AB .There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. This electronic part is mounted in the way of Surface Mount .This electrical device is powered by 2.5V~5.5V volts.The chip is equipped with 1 channels.During operation, the value Depop, Short-Circuit and Thermal Protection, Shutdown can be ensured.A temperature greater than -40°C~85°C TA should not be used.The device contains 8 pins.This part is included in Audio/Video Amplifiers .Amp parts belongs to TPA311 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 700mW kWh per hour.Supply type Single is assigned to this electronic part.700μA external influences affect the amount of quiescent current consumed by this device.
TPA311DGN Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA311 family
700mW kWh per hour
TPA311DGN Applications
There are a lot of Texas Instruments TPA311DGN audio amplifiers applications.
- High gain DC amplifier
- ECG equipment
- Addition and subtraction operation circuits
- single/dual op amp sum and difference circuits
- High/low-pass filter circuit
- Power control
- Multiplication and division circuits
- Industrial control system
- Scintillation detectors
- Power transmission