TPA2012D2RTJTG4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 38.101759mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Class D |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 5.2W |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA2012 |
| Pin Count | 20 |
| Output Type | 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 9mA |
| Power Dissipation | 5.2W |
| Quiescent Current | 6mA |
| Output Power | 2.1W |
| Common Mode Rejection Ratio | 69 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 24dB |
| Power Supply Rejection Ratio (PSRR) | -75dB |
| Max Output Power | 2.1W |
| Max Output Power x Channels @ Load | 2.1W x 2 @ 4 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 4Ohm |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 730μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA2012D2RTJTG4 Overview
The package 20-WFQFN Exposed Pad contains it.The chip is recommended to be packaged in Tape & Reel (TR) case. Transmission lines can be terminated with 20 terminations, which have devices that match the line's characteristic impedance.Amp parts uses 2-Channel (Stereo) as the output.Class D is the type of this electrical device.The computer or other communication device has 20 pins, which are pronged contacts.A part of this electronic device is mounted in the way of Surface Mount .There is 2.5V~5.5V voltage supply to this electrical device.There are 2 channels available on the device.Operation can be ensured by Differential Inputs, Short-Circuit and Thermal Protection, Shutdown .Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.A total of 20 pins are present on the device.There is a part belonging to Audio/Video Amplifiers .Amp parts is included in the TPA2012 family.This electronic component's maximum output power is 2.1W kWh per hour.During this time, the maximum supply voltage (Vsup) reaches 5.5V .A Single supply type is used for this electronic part.Power is supplied by a 3/5V volt source.The device consumes 6mA quiescent current
TPA2012D2RTJTG4 Features
20-WFQFN Exposed Pad package
20 pin count
TPA2012 family
2.1W kWh per hour
TPA2012D2RTJTG4 Applications
There are a lot of Texas Instruments TPA2012D2RTJTG4 audio amplifiers applications.
- Fission chambers
- Switching amplifier
- Automation control systems
- ECG equipment
- Instrumentation
- Power control
- High/low-pass filter circuit
- Power transmission
- Active probe
- Addition and subtraction operation circuits