TPA2010D1YZFT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | NanoFree™ |
| JESD-609 Code | e1 |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | Class D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 780mW |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA2010 |
| Pin Count | 9 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.8mA |
| Power Dissipation | 780mW |
| Quiescent Current | 3.4mA |
| Output Power | 2.5W |
| Common Mode Rejection Ratio | 68 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Output Power | 2.5W |
| Max Output Power x Channels @ Load | 2.5W x 1 @ 4 Ω |
| Load Impedance | 4Ohm |
| Height | 625μm |
| Length | 1.75mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA2010D1YZFT Overview
In the 9-UFBGA, DSBGA package, it is embedded.The device is in the form of Tape & Reel (TR) .9 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Currently, amp parts is configured wAmp partsh 1-Channel (Mono) as the output.This electrical device is classified as type Class D .There are 9 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. Amp parts is mounted in front of Surface Mount .In this electrical device, the supply voltage is 2.5V~5.5V .1 channels are provided by the device.Operation can be ensured by Depop, Differential Inputs, Shutdown, Thermal Protection .Ideally, the operating temperature should not exceed -40°C~85°C TA .The device contains 9 pins.Amp parts is part of Audio/Video Amplifiers .The TPA2010 family contains this object.In this electronic part, the output power is a maximum of 2.5W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 2.5V .The maximal supply voltage (Vsup) reaches 5.5V .Electronic parts with Single supply types are available.Power is supplied by a 3/5V volt source.Amp parts belongs to the NanoFree? series of electronic components.Without external influences, it consumes 3.4mA of quiescent current.
TPA2010D1YZFT Features
9-UFBGA, DSBGA package
9 pin count
TPA2010 family
2.5W kWh per hour
NanoFree? series
TPA2010D1YZFT Applications
There are a lot of Texas Instruments TPA2010D1YZFT audio amplifiers applications.
- Signal transformation
- Inverse/same-phase proportional circuit
- pH (acidity)
- Precision measurement
- Multiplication and division circuits
- Signal amplification
- Band-stop filter
- High-frequency data acquisition systems
- Logarithmic and exponential operation circuits
- Automotive sensors