TPA122DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA122 |
| Pin Count | 8 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Nominal Supply Current | 3mA |
| Power Dissipation | 2.14W |
| Quiescent Current | 1.5mA |
| Output Power | 70mW |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Max Output Power | 70mW |
| Max Output Power x Channels @ Load | 70mW x 2 @ 8 Ω |
| Harmonic Distortion | 0.1% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA122DGNR Overview
The device is embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .Amp parts is packaged in the way of Tape & Reel (TR) .In 8 terminations, a transmission line is terminated with a device that matches its characteristic impedance.Output Headphones, 2-Channel (Stereo) is configured for this device.This electrical device is classified as type Class AB .8 pins are pronged contacts on a computer or other communication device that form a signal interface.A part of this electronic device is mounted in the way of Surface Mount .This electrical device is powered by 2.5V~5.5V volts.2 channels are present on the device.Amp parts is possible to operate wAmp partsh Depop, Short-Circuit and Thermal Protection, Shutdown .The operating temperature should not exceed -40°C~85°C TA °C.This device has 8 pins.This part is included in Audio/Video Amplifiers .Amp parts is a member of the TPA122 family.The chip should be mounted in the way of Surface Mount .There is a maximum output power of 70mW kWh per hour from this electronic component.Amp parts is a Single supply type.The device consumes 1.5mA quiescent current and is unaffected by external influences.As a result of its superior flexibility, it employs 2 circuits.
TPA122DGNR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA122 family
70mW kWh per hour
TPA122DGNR Applications
There are a lot of Texas Instruments TPA122DGNR audio amplifiers applications.
- Video conversion and routing
- Video and image computer boards
- Comparator
- Multiplication and division circuits
- Power transmission
- Scintillation detectors
- Proportional counter tubes
- single/dual op amp sum and difference circuits
- High-frequency data acquisition systems
- Test equipment