TPA0253DGQR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 18.795734mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Depop, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA0253 |
| Pin Count | 10 |
| Output Type | 1-Channel (Mono) with Stereo Headphones |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 4.8mA |
| Power Dissipation | 2.14W |
| Max Supply Current | 4.8mA |
| Quiescent Current | 3.2mA |
| Output Power | 1W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Gain | 8 dB |
| Max Output Power | 1W |
| Max Output Power x Channels @ Load | 1W x 1 @ 8 Ω; 85mW x 2 @ 32 Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA0253DGQR Overview
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad contains an embedded device.Amp parts is packaged in the way of Cut Tape (CT) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 10 termination.The output it is configured with uses 1-Channel (Mono) with Stereo Headphones .In this case, it is an electrical device of type Class AB .In a computer or other communication device, there are 10 pins, which are pronged contacts.The electronic part is positioned in the way of Surface Mount .This electrical device operates at 2.5V~5.5V volts.1 channels are present on the device.During operation, the value Depop, Shutdown can be ensured.Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .The device contains 10 pins.There is a part belonging to Audio/Video Amplifiers .Amp parts is part of the TPA0253 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 1W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 2.5V .During this time, the maximum supply voltage (Vsup) reaches 5.5V .There is a supply type of Single for this electronic part.Power supply for this device is 3/5V volts.3.2mA external influences affect the amount of quiescent current consumed by this device.
TPA0253DGQR Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
10 pin count
TPA0253 family
1W kWh per hour
TPA0253DGQR Applications
There are a lot of Texas Instruments TPA0253DGQR audio amplifiers applications.
- Weak signal detection
- Medical imaging
- Integrator and differentiator circuits
- Band-pass filter
- Fast A/D and D/A converters, video amplifiers
- Biopotential
- Communication device
- Power generator
- Industrial control system
- Displayers for aircraft and air transportation control systems