TP3057N/NOPB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -25°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | PCM, Filter |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TP3057 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 5mA |
| Number of Bits | 8 |
| Data Interface | Serial |
| Resolution | 1 B |
| Sampling Rate | 8 ksps |
| Voltage - Supply, Analog | ±5V |
| Number of D/A Converters | 1 |
| Sigma Delta | No |
| Number of ADCs / DACs | 1 / 2 |
| Filter | YES |
| Companding Law | A-LAW |
| Neg Supply Voltage-Nom | -5V |
| Height | 3.66mm |
| Length | 21.41mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TP3057N/NOPB Overview
Space-saving is achieved by supplying it in the 16-DIP (0.300, 7.62mm) package. As a packaging method, Tube is adopted. In numerous applications, this electronic part can deliver high-efficiency performance as a type of PCM, Filter. This device employs the mounting type Through Hole. When the operating performance is set to -25°C~125°C, it is able to operate normally. It is integrated with 1 / 2 ADCs / DACs. ±5V of supply voltage are applied to the analog circuit. Transmission lines have 16 terminations to prevent signals from reflecting. The device has a 16-pin configuration. 16 pins are connected to it. By using its base part number TP3057, you can find more related parts. This device is mounted on a PCB which uses the Through Hole technology. Ideally, the supply voltage should remain at 5.25V. It is classified under the subcategory of Codecs. A minimum supply voltage of 4.75V should be maintained. There is 5V supply voltage for this device. 5V is the supply voltage that it can operate from. The conversion of digital signals into analog signals is done using D/A converters, and there are 1 D/A converters available. Information is stored in 8 bits. An average current of 5mA will flow through a circuit at any given time. There are -5V supply voltages that have a more negative polarity than the ground.
TP3057N/NOPB Features
Embedded in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs
TP3057N/NOPB Applications
There are a lot of Texas Instruments TP3057N/NOPB CODECs Interface ICs applications.
- Speed synchronization of multiple motors in industries
- Multi-axis control
- Multiplication
- Analog to digital conversion in the analog decoder
- Converting
- Logical circuits
- Automatic health monitoring systems
- Textile manufacturing
- Web tensioning
- Registration mark timing