TOP269EG
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Series | TOPSwitch®-JX |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Power Rating | 162W |
| Max Power Dissipation | 120W |
| Technology | CMOS |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Output Voltage | 19V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 2.1mA |
| Output Power | 120W |
| Control Features | Frequency Control |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz 132kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 78 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 8.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TOP269EG Overview
This ac to dc converter is included in the package 7-SIP, 6 Leads, Exposed Pad, Formed Leads .In Tube case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.When the switching frequency reaches 66kHz 132kHz , the process is complete.The ac/dc converter has a total of 7 pins.The product is acdc converter of the TOPSwitch?-JX manufacturer family.The number of outputs to run is 1 .It produces a voltage of 19V .You can read the standard of REACH SVHC : No SVHC .It is available to power the AC to DC converter input voltage under 265V .A coverter produces 120W watts of output power.The AC to DC inverter can be used with an input voltage of less than 85V V.Supply voltage across the converter must be 85V at all times.This converter can operate at a maximum supply voltage of 265V .The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
TOP269EG Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 66kHz 132kHz
With 7 pins
TOP269EG Applications
There are a lot of Power Integrations TOP269EG AC DC Converters applications.
- Tablets
- Humidifier
- Universal input AC/DC adapters (15W - 45W)
- Appliances
- Smartphones
- Z-Wave
- Standby power supplies for TV
- Handheld/Battery-Powered Systems
- Cellular phone chargers
- USB-PD 2.0