TOP267EG
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TOPSwitch®-JX |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Power Rating | 137W |
| Max Power Dissipation | 103W |
| Technology | CMOS |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Output Voltage | 19V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 1.7mA |
| Output Power | 103W |
| Control Features | Frequency Control |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz 132kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 78 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 8.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TOP267EG Overview
In the package 7-SIP, 6 Leads, Exposed Pad, Formed Leads , the ac to dc converter is embedded.It is available in Tube AC/DC power converter.Through Hole is mounted in the way of this AC/DC converter.The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .When the switching frequency reaches 66kHz 132kHz , the process is complete.Approximately 7 pins are present on the ac/dc converter.The AC to DC converter belongs to the manufacturer family of TOPSwitch?-JX .AC to DC converter is necessary to run 1 outputs.The voltage output by this AC/DC converter is 19V .You may read the REACH SVHC standard at No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.In the AC to DC transformer of a coverter, the output power is 103W .A voltage of less than 85V V can be used with the AC to DC inverter.The minimum supply voltage across the converter is 85V .There is 265V maximum supply voltage across the converter.An input voltage (AC) should be applied under 265V to the AC to DC power converter.
TOP267EG Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 66kHz 132kHz
With 7 pins
TOP267EG Applications
There are a lot of Power Integrations TOP267EG AC DC Converters applications.
- Battery Chargers
- Wall switches
- Cleaners
- Laptops and personal digital assistants
- MPS parts
- Low power ac?dc Adapters for Chargers
- Set Top Boxes (STB)
- Standby power supplies for VCR
- Charger
- Appliance Power Supplies