TOP266EG
| Parameters | |
|---|---|
| Packaging | Tube |
| Series | TOPSwitch®-JX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Terminal Finish | MATTE TIN |
| Power Rating | 119W |
| Max Power Dissipation | 86W |
| Technology | CMOS |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 600μA |
| Output Current | 2.5A |
| Output Power | 86W |
| Control Features | Frequency Control |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz 132kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 83 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 78% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 8.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
TOP266EG Overview
This ac to dc converter is included in the package 7-SIP, 6 Leads, Exposed Pad, Formed Leads .The ac dc converter is available in Tube case.The AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.This AC DC converter employs ANALOG CIRCUIT analog IC type.At this point, the switching frequency reaches 66kHz 132kHz .A ac/dc converter with 7 pins is available.This AC to DC converter belongs to the TOPSwitch?-JX family of manufacturers.A total of 1 outputs are available for processing.Current output is set to 2.5A .Its output voltage is12V .You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered from the input voltage under 265V .It is assumed that a coverter generates 86W as its output power.If the input voltage is less than 85V V, the AC to DC inverter can be used.This converter requires a minimum supply voltage of 85V volts.This converter can operate at a maximum supply voltage of 265V .Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
TOP266EG Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 66kHz 132kHz
With 7 pins
Output Current at 2.5A
TOP266EG Applications
There are a lot of Power Integrations TOP266EG AC DC Converters applications.
- Standby power
- Adapter/Charger for Cell
- Low power ac?dc Adapters for Chargers
- Charger
- MP3
- USB type-c v1.2 chargers with optional VDM
- Home appliances
- Power tools
- Laptops and personal digital assistants
- Small off-line low voltage power supplies