TOP253MN
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 10-SDIP (0.300, 7.62mm), 9 Leads |
| Surface Mount | NO |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TOPSwitch®-HX |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Terminal Finish | Pure Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 25W |
| Max Power Dissipation | 43W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Frequency | 66kHz |
| JESD-30 Code | R-PDIP-T9 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.3mA |
| Power Dissipation | 9W |
| Output Current | 1.37A |
| Output Power | 15W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 83 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 78% |
| Output Isolation | Isolated |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 5.08mm |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TOP253MN Overview
There is a ac to dc converter embedded in package 10-SDIP (0.300, 7.62mm), 9 Leads .The AC/DC power converter type is Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.It has a total of 9 terminations.There are 10 pins on this ac/dc converter.It belongs to the family of TOPSwitch?-HX manufacturers.There are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .AC to DC converter is set to 1.37A for the output current.It produces a voltage of 700V .As long as AC to DC converter is operated at frequency 66kHz ,it is capable of attaining high efficiency.It is possible to read the REACH SVHC standard at: No SVHC .Input voltage for the AC to DC converter is available under 265V .There is 15W output power generated by a coverter.It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.There should be no less than 85V voltage across the converter.There is a maximum supply voltage of 265V across the converter.
TOP253MN Features
Packaged with 10-SDIP (0.300, 7.62mm), 9 Leads
With 10 pins
Output Current at 1.37A
TOP253MN Applications
There are a lot of Power Integrations TOP253MN AC DC Converters applications.
- Switching AC-DC Adapter
- Charger
- Universal Off-Line Power Supplies
- Z-Wave
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Battery chargers for media tablets
- IoT Applications
- Standby Power Supply
- Portable Apparatus
- Standby power supplies for IR