TNY377PN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Series | TinySwitch®-PK |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 23.5W |
| Power Rating | 23.5W |
| Max Power Dissipation | 28W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 264kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 1.4A |
| Input Voltage-Nom | 2.2V |
| Max Supply Voltage | 9V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 570μA |
| Output Current | 1.4A |
| Output Power | 28W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz~264kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 65 % |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY377PN Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.It is available in Tube AC/DC power converter.This AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.When the switching frequency reaches 132kHz~264kHz , the circuit is closed.As a result, it has a total of 7 terminations.There are 8 pins on this ac/dc converter.There are 8 pins on the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .It belongs to the manufacturer family of TinySwitch?-PK .There are 1 outputs to run.It has been set to 1.4A for the output current.In this AC to DC transformer, the output voltage is 700V .AC to DC converter reaches high efficiency when operated at a frequency of 264kHz .REACH SVHC standard can be found at No SVHC .Input voltages under 265V can be used to power the AC to DC converter.Coverters generate 28W as their output power.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .The AC to DC power supply can operate with a minimum supply voltage of -300mV volts.
TNY377PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz~264kHz
With 8 pins
Output Current at 1.4A
TNY377PN Applications
There are a lot of Power Integrations TNY377PN AC DC Converters applications.
- Adapter for ADSL
- Utility meters
- Smartphones
- AC/DC Adaptors/Chargers for Cell Phones
- Power tools fast chargers with trickle and on/off
- AC/DC Adaptors/Chargers for PDAs
- Switching AC-DC Adapter
- Adapters
- LED lights
- Power Adaptors