TNY289PG
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 18W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 25W |
| Max Power Dissipation | 32W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 800μA |
| Output Power | 32W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 4.06mm |
| Length | 9.44mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY289PG Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.The AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.When the switching frequency reaches 124kHz~140kHz , the circuit is closed.In total, there are 7 terminations.There are 7 pins on the ac/dc converter.The ac dc converters is suitable for mounting by Through Hole .The AC to DC converter belongs to the manufacturer family of TinySwitch?-4 .There are 1 outputs to run.As a result, its output voltage is 265V .SVHC for REACH can be found in the standard No SVHC .It is available to power the AC to DC converter input voltage under 265V .Coverters generate 32W as their output power.As a result of using this ACDC converter, SEATED_HT CALCULATED can also be detected.It is possible to use the AC to DC inverter with an input voltage less than 85V V.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .A minimum supply voltage of 85V is sufficient for it to operate.
TNY289PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins
TNY289PG Applications
There are a lot of Power Integrations TNY289PG AC DC Converters applications.
- Set -Top Box (STB) Power Supply
- AC?DC USB chargers for Cameras
- Adapters
- Universal input AC/DC adapters (15W - 45W)
- AC?DC USB chargers for Tablets
- Automotive Infotainment
- Standby power supplies for VCR
- MP3
- Humidifier
- Laptops and personal digital assistants