TNY288DG
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | MATTE TIN |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 19.5W |
| Max Power Dissipation | 14.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Max Supply Voltage | 725V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 615μA |
| Output Power | 26W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY288DG Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .It is available in Tube AC/DC power converter.Surface Mount is mounted in the way of this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.In this AC to DC transformer, the switching frequency is 124kHz~140kHz .There are a total of 7 terminations in it.It contains 7 pins.It is suitable for mounting by Surface Mount .This AC to DC converter belongs to the TinySwitch?-4 manufacturer family.In this AC to DC transformer, there are 1 outputs to run.In the following link, you will find the REACH SVHC standard: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .A coverter produces 26W watts of output power.It is also possible to determine SEATED_HT CALCULATED using this ACDC converter.If the input voltage is less than 85V V, the AC to DC inverter can be used.A AC to DC power converter's input voltage (AC) should not exceed 265V .It is capable of working with a minimum supply voltage of -300mV volts.
TNY288DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins
TNY288DG Applications
There are a lot of Power Integrations TNY288DG AC DC Converters applications.
- Adaptors for Portable Media Player
- Handheld/Battery-Powered Systems
- MP3
- Battery chargers for cellular phones
- AC--DC Adapter
- Battery chargers for cordless
- 3.3V power supplies
- White goods
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Standby Power for General Off-Line Applications