TNY280GN
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 36.5W |
| Max Power Dissipation | 36.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Input Voltage-Nom | 2.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 630μA |
| Output Power | 28.5W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.76mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
TNY280GN Overview
This ac to dc converter is included in the package 8-SMD (7 Leads), Gull Wing .The AC/DC power converter is available in Tube .There is a mounting point for this AC/DC converter in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.There have been 7 terminations of this program.There are 8 pins on this ac/dc converter.There are a total of 8/7 pins on the ac-dc converter.It is suitable for mounting by Surface Mount .A member of the TinySwitch?-III manufacturer family, it has the following characteristics.There are 1 outputs to run.Its output voltage amounts to 700V .The power AC DC is capable of high efficiency when operated at a frequency of 132kHz .You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered from the input voltage under 265V .In the AC to DC transformer of a coverter, the output power generated is 28.5W .An input voltage of less than 85V V is required to operate the AC to DC inverter.This converter requires a minimum supply voltage of 85V volts.It is possible to supply 265V voltage across the converter.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .This output uses Adjustable .
TNY280GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Type : Adjustable
TNY280GN Applications
There are a lot of Power Integrations TNY280GN AC DC Converters applications.
- Cleaners
- Switching AC-DC Charger
- Battery chargers for media tablets
- Power tools fast chargers with trickle and on/off
- Wireless System
- Industrial controls
- Auxiliary Power Supply
- White goods
- Standby power
- LED lights