TNY279GN
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 25W |
| Max Power Dissipation | 32W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Input Voltage-Nom | 2.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 510μA |
| Output Power | 25W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 132kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.64mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY279GN Overview
This ac to dc converter is included in the package 8-SMD (7 Leads), Gull Wing .Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING REGULATOR analog IC type.132kHz is the switching frequency.A total of 7 terminations have been recorded.Approximately 7 pins are present on the ac/dc converter.There are 8/7 pins on the ac-dc converter.Suitable mounting is provided by Surface Mount .It belongs to the manufacturer family of TinySwitch?-III .The number of outputs to run is 1 .This AC/DC converter produces a voltage of 12V as its output.It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 265V voltage.It is assumed that a coverter generates 25W as its output power.A voltage of less than 85V V can be used with the AC to DC inverter.Across the converter, the minimum supply voltage is 85V .A maximum voltage of 265V can be applied across the converter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .It is configured to use Adjustable as an output.
TNY279GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 7 pins
Output Type : Adjustable
TNY279GN Applications
There are a lot of Power Integrations TNY279GN AC DC Converters applications.
- Auxiliary Power Supplies
- Appliance Power Supplies
- Standby and Auxiliary Power Supplies
- Adapter/Charger for Cell
- Battery Chargers
- USB type-c v1.2 chargers with optional VDM
- Standby power supplies for TV
- Adapter/Charger for Cordless Phones
- AC?DC USB chargers for Cell Phones
- Records