TNY275PN
| Parameters | |
|---|---|
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Supplier Device Package | DIP-8C |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | TinySwitch®-III |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power (Watts) | 15W |
| Power Rating | 15W |
| Max Power Dissipation | 15W |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Nominal Supply Current | 295μA |
| Output Power | 11.5W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
TNY275PN Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.There is a mounting point for this AC/DC converter in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.As a result, the switching frequency reaches 132kHz .It contains 7 pins.Through Hole is the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the TinySwitch?-III family of manufacturers.There are 1 outputs to run.In this AC to DC transformer, the output voltage is 12V .Coverters generate 11.5W as their output power.A minimum voltage supply across the converter is 85V .Across the converter, the maximum supply voltage is 265V .The power AC DC comes with a DIP-8C case for packing.The maximum 150°C ensures that the AC to DC power converter is stable.There must be a minimum working temperature of -40°C for this isolated switch.It is configured with a Adjustable output.
TNY275PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
With 7 pins
Output Type : Adjustable
TNY275PN Applications
There are a lot of Power Integrations TNY275PN AC DC Converters applications.
- Set-top boxes
- 3.3V power supplies
- Chargers for cell/cordless phones
- AC/DC Adaptors/Chargers for Cell Phones
- Standby Power Supplies
- Off--line Battery Charger
- MPS parts
- Battery chargers for cellular phones
- Replacements for bulky plug-in transformers
- AC?DC USB chargers for Cell Phones