TNY274GN
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 11W |
| Max Power Dissipation | 11W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Input Voltage-Nom | 2.2V |
| Voltage | 700V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 275μA |
| Output Power | 8.5W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.36mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY274GN Overview
This ac to dc converter is embedded in package 8-SMD (7 Leads), Gull Wing .It is available in Tube AC/DC power converter.It is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.In this AC to DC transformer, the switching frequency is 132kHz .As a result, it has had 7 terminations.The ac/dc converter has 7 pins.The pins of the ac-dc converter count up to 8/7 .It is suitable for mounting by Surface Mount .It belongs to the manufacturer family of TinySwitch?-III .The number of outputs to run is 1 .In this AC to DC transformer, the output voltage is 12V .In the AC to DC transformer of a coverter, the output power is 8.5W .A minimum voltage of 85V is required across the converter.There is 265V maximum supply voltage across the converter.The output it is configured with uses Adjustable .
TNY274GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 7 pins
Output Type : Adjustable
TNY274GN Applications
There are a lot of Power Integrations TNY274GN AC DC Converters applications.
- AC/DC Adaptors/Chargers for Cell Phones
- Handheld/Battery-Powered Systems
- Standby Power Supplies
- LED Driver
- Standby and Auxiliary Power Supplies
- Battery chargers for cellular phones
- White goods
- AC?DC USB chargers for Tablets
- Low-Voltage I/O System Power
- Switching AC-DC Adapter