TNY264PN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Weight | 2.26799g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 9W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Voltage | 700V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 225μA |
| Output Current | 400mA |
| Output Power | 6W |
| Control Features | EN |
| Topology | Flyback |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Drain to Source Resistance | 28Ohm |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY264PN Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube AC/DC power converter, it is available.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .There are a total of 7 terminations.Approximately 8 pins are present on the ac/dc converter.There are a total of 8 pins on the ac-dc converter.Through Hole are the recommended mounting method for the ac dc converters.It belongs to the family of TinySwitch?-II manufacturers.Running 1 outputs is available.In this AC to DC transformer, the output current is set to 400mA .As a result, its output voltage is 700V .The power AC DC is capable of high efficiency when operated at a frequency of 132kHz .SVHC for REACH can be found in the standard No SVHC .It is assumed that a coverter generates 6W as its output power.This converter requires a minimum supply voltage of 85V volts.The maximum supply voltage across the converter is 265V .This output uses Adjustable .
TNY264PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 400mA
Output Type : Adjustable
TNY264PN Applications
There are a lot of Power Integrations TNY264PN AC DC Converters applications.
- Tablets
- Low-Voltage I/O System Power
- Standby Power Supplies
- AC?DC USB chargers for Cell Phones
- Battery chargers for smart phones
- Air Conditioning
- Battery Chargers
- LED Driver
- White goods
- Power tools fast chargers with trickle and on/off