TNY264GN-TL
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 9W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 225μA |
| Output Current | 267mA |
| Output Power | 6W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY264GN-TL Overview
In the 8-SMD (7 Leads), Gull Wing package, the ac to dc converter is embedded.Tape & Reel (TR) case is available for the ac dc converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.When the switching frequency reaches 132kHz , the circuit is closed.As a result, it has a total of 7 terminations.Approximately 8 pins are present on the ac/dc converter.There are 8/7 pins on the ac-dc converter.Suitable mounting is provided by Surface Mount .Currently, it is acdc converter of the manufacturer family of TinySwitch?-II .There are 1 outputs to be run.Current output is set to 267mA .The voltage output by this AC/DC converter is 5.8V .Coverters generate 6W in terms of output power.Supply voltage across the converter must be 85V at all times.265V is the maximum supply voltage across the converter.
TNY264GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 132kHz
With 8 pins
Output Current at 267mA
TNY264GN-TL Applications
There are a lot of Power Integrations TNY264GN-TL AC DC Converters applications.
- Consumer electronics
- Standby power supplies for IR
- Vacuum Cleaner
- Battery chargers for cordless
- USB type-c v1.2 chargers with optional VDM
- Adapters for Handheld Electronics
- Power adapters for network devices
- Chargers for cell/cordless phones
- White goods
- MPS parts