TNY256P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| Series | TinySwitch® Plus |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 10W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 255μA |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 130kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 69 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 66% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 4.45mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TNY256P Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .There is 130kHz switching frequency.There are a total of 8 terminations in it.There are 8 pins on this ac/dc converter.The ac-dc converter has 8 pins.The product is acdc converter of the TinySwitch? Plus manufacturer family.The output voltage of the AC/DC converter is 5.8V .In order for the converter to function properly, the supply voltage must be at least 85V .There is a maximum voltage supply across the converter of 265V volts.
TNY256P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 130kHz
With 8 pins
TNY256P Applications
There are a lot of Power Integrations TNY256P AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Auxiliary Power Supplies
- Smartphones
- Wireless System
- Replaces linear transformers
- Records
- Standby Power Supply
- SMPS house keeping power supplies
- Utility meters
- Appliance Power Supplies