TNY254P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 4W |
| Max Power Dissipation | 4W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 140μA |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 44kHz |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 4.45mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TNY254P Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.It is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.When the switching frequency reaches 44kHz , the process is complete.There are a total of 8 terminations in it.In this ac/dc converter, there are 8 pins.The pins of the ac-dc converter count up to 8 .The AC to DC converter belongs to the manufacturer family of TinySwitch? .There is 5.8V voltage output from it.An amount of current of 0.4A is the maximum that can be supplied to the ac to dc inverter.The minimum supply voltage across the converter is 85V .Across the converter, the maximum supply voltage is 265V .
TNY254P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 44kHz
With 8 pins
TNY254P Applications
There are a lot of Power Integrations TNY254P AC DC Converters applications.
- SMPS house keeping power supplies
- PDAs
- Humidifier
- Appliances
- RCC SMPS
- Adapters
- Appliance Power Supplies
- Automotive Telematics
- LED Driver
- Laptops and personal digital assistants