TNY254GN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | TinySwitch® |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 4W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 140μA |
| Output Current | 280mA |
| Output Power | 4W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 44kHz |
| Supply Current-Max (Isup) | 0.2mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 3.73mm |
| Length | 9.59mm |
| Width | 6.35mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY254GN Overview
A ac to dc converter of the package 8-SMD, Gull Wing contains the ac to dc converter.It is available in Tube AC/DC power converter.It is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.The switching frequency reaches 44kHz .As a result, it has had 8 terminations.A total of 8 pins are present on the ac-dc converter.It belongs to a manufacturer family of TinySwitch? .There are 1 outputs to be run.There is 280mA output current set.In this AC to DC transformer, the output voltage is 5.8V .There is 4W output power generated by a coverter.A minimum voltage of 85V is required across the converter.A maximum voltage of 265V can be applied across the converter.
TNY254GN Features
Packaged with 8-SMD, Gull Wing
Switching Frequency at 44kHz
Output Current at 280mA
TNY254GN Applications
There are a lot of Power Integrations TNY254GN AC DC Converters applications.
- Charger
- Small off-line low voltage power supplies
- Networking
- Standby power supplies for TV
- Battery chargers for mobile devices with touchpad display
- Adapter/Charger for Cell
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Set -Top Box (STB) Power Supply
- Adaptors for DSCs
- Automotive Clusters