TMUX1111PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TMUX1111 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Bandwidth | 400MHz |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 80pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 10pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SPST |
| Switch Time (Ton, Toff) (Max) | -, - |
| Charge Injection | -1.5pC |
| Channel-to-Channel Matching (ΔRon) | 130m Ω |
| Crosstalk | -90dB @ 10MHz |
| Switch-on Time-Max | 190ns |
| Switch-off Time-Max | 190ns |
| Voltage - Supply, Single (V+) | 1.08V~5.5V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
TMUX1111PWR Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operation at a temperature around -40°C~125°C TA. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 1.2V volts, the electrical part can be powered up and run. Based on SPST switching circuits, these analog multiplexers work. Circuits number 4 make up this analogue multiplexer. Using the TMUX1111 search parameter, you can discover variants of the switch. Analogue multiplexers require a 1.08V~5.5V voltage to drain from a single voltage supply. In 400MHz-bandwidths, data can be transferred.
TMUX1111PWR Features
1 Channels
Switch Circuit: SPST
-3db Bandwidth: 300MHz
Bandwidth: 400MHz
TMUX1111PWR Applications
There are a lot of Texas Instruments TMUX1111PWR Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- ATM
- Battery-powered systems
- Channelized and Unchannelized DS3 applications
- Fault Tolerant Systems
- Fiber to the Home
- Sample hold systems
- Cable PC
- Avionics test equipment