TMUX1072DGSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TMUX1072 |
| JESD-30 Code | S-PDSO-G10 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Bandwidth | 1200MHz |
| -3db Bandwidth | 1.2GHz |
| On-State Resistance (Max) | 18Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 185μA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 4pF |
| On-state Resistance Match-Nom | 0.07Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250μs, 10μs |
| Channel-to-Channel Matching (ΔRon) | 70m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switch-off Time-Max | 10000ns |
| Voltage - Supply, Single (V+) | 2.3V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
TMUX1072DGSR Overview
Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C. In total, there are 10 terminations. As a result of its 2 channels, this electronic component provides high-quality output. A 3.3V voltage supply should turn on and run the electronic component. SPDT switching circuits are used in these analog switch ics. 2 circuits are used in this analogue multiplexer. Use TMUX1072 to search for variants of the digital switches. This analogue multiplexer requires a voltage of 2.3V~5.5V when it drains from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The transfer of data can be performed over 1200MHz bandwidths.
TMUX1072DGSR Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 1.2GHz
Bandwidth: 1200MHz
TMUX1072DGSR Applications
There are a lot of Texas Instruments TMUX1072DGSR Analog Switches & Multiplexers ICs applications.
- RGB switches
- Switching Systems
- Signal routing between systems
- PBX interfaces
- Video signal routing
- Frame Relay Equipment
- Medical Instrumentation
- SONET
- Routers
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads