TLV521DCKR
| Parameters | |
|---|---|
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TLV521 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 350nA |
| Slew Rate | 0.0025V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | CMOS |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.7V~5.5V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 6kHz |
| Unity Gain BW-Nom | 6 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Common-mode Reject Ratio-Min | 70 dB |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
TLV521DCKR Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. Buffer amps of this type are called CMOS-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. We are approaching the 5h termination of the year. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3.3V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 5 pins are available on the instrumentation amplifier. The input offset voltage is 100μV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 350nA. On this buffer amplifier, there are 1 circuits. On the output type, there are Rail-to-Rail different types of op amps. This linear amplifier pack is based on the TR axis.
TLV521DCKR Features
supply voltage of 3.3V
Output Type: Rail-to-Rail
TLV521DCKR Applications
There are a lot of Texas Instruments TLV521DCKR Instrumentational OP Amps applications.
- Oscilloscopes
- Home audio systems
- Signal transformation
- Medical imaging
- Differentiator circuits
- Inverse/same-phase proportional circuit
- ECG equipment
- earphone
- RF cable systems
- Automation control systems