TLV3704IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 720mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLV3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-8/2.7/16V |
| Nominal Supply Current | 800nA |
| Power Dissipation | 720mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3704IPWR Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .Output type CMOS, Push-Pull, Rail-to-Rail is used for this comparator.The chip is packaged with Tape & Reel (TR) .You can find 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .There are a total of 4 elements in it.Electronic comparator has 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator consists of 14 pins.You may wish to search TLV3704 for more solutions that address your specific needs.This comparator presents a quiescent current of 1μA .There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires 800nA supply current.A current supply greater than 800nA may cause the comparator to malfunction.In order to operate the device, +-1.35/+-8/2.7/16V power supplies are sufficient.You are allowed to input a maximum current of 250pA into the device.In accordance with the voltage formula, the part's voltage gain is 120dB .The device is acceptable to pack by TR .
TLV3704IPWR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704IPWR Applications
There are a lot of Texas Instruments TLV3704IPWR linear comparators applications.
- System control and monitoring
- RC Timers
- General-Purpose Portable Devices
- Alarm and Monitoring Circuits
- Portable Battery Monitoring
- Laptop Computers
- Portable and Battery-Powered Systems
- Battery management and protection
- Consumer Medical Electronics
- Power Supervision