TLV3702IDGKG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 481mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Nominal Supply Current | 1.6μA |
| Power Dissipation | 481mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3702IDGKG4 Overview
In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a CMOS, Push-Pull, Rail-to-Rail output.The part will be shipped by Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .This is a 2 element comparator.A total of 8 pins are included.Electronic comparator is recommended that you mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search TLV3702 for more options.In this comparator, the quiescent current is 1μA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 1.6μA when using the device.Current supply exceeding 800nA could cause disfunction of the compartator.Input current to the device is limited to 250pA .Based on the voltage formula, the voltage gain of the part is 120dB .The operating supply voltage for normal operation should be 15V .
TLV3702IDGKG4 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3702IDGKG4 Applications
There are a lot of Texas Instruments TLV3702IDGKG4 linear comparators applications.
- Appliances
- Power management
- General Purpose Low Voltage Applications
- Hand-Held Electronics
- High-Speed Differential Line Receiver
- Wearable Devices
- Motor drives
- Handheld Instruments
- High-Speed Sampling Circuits
- Zero-Crossing Detectors