TLV3492AIDCNT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3491 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Nominal Supply Current | 1.2μA |
| Output Current | 5mA |
| Max Supply Current | 1.2μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 1.2μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 69.12dB |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 69.12dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.63mm |
| Thickness | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3492AIDCNT Overview
To facilitate transportation, it comes packaged in SOT-23-8 .This comparator is of the CMOS, Push-Pull, Rail-to-Rail output type.This chip is designed with the Cut Tape (CT) package.The comparator has 8 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.In total, it contains 2 elements.Electronic comparator includes 8 pins.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 8 pins on the comparator.You can search TLV3491 if you are looking for more pin-to-pin solutions.There is a quiescent current of 1.2μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.For normal use of the device, the nominal supply current should be 1.2μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1.2μA .A maximum current of 10pA can be supplied to the device.The operating supply voltage for normal operation should be 5V .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLV3492AIDCNT Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
TLV3492AIDCNT Applications
There are a lot of Texas Instruments TLV3492AIDCNT linear comparators applications.
- Security Detection Systems
- Portable Battery Monitoring
- System control and monitoring
- Industrial
- Factory automation & control
- Infotainment and Clusters
- DC/DC and AC/DC power supplies
- Battery management and protection
- High-Speed Sampling Circuits
- General-Purpose, Low-Voltage Applications