TLV341IDCKTG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TLV341 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 75μA |
| Nominal Supply Current | 150μA |
| Output Current | 115mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 115mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 2.2MHz |
| Gain Bandwidth Product | 2.3MHz |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.2MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV341IDCKTG4 Overview
The linear amplifier is packaged in a 6-TSSOP, SC-88, SOT-363 case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 6 terminations. Linear amplifier has a total of 6 pins. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 6 pins on it. The input offset voltage is 300μV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 75μA , this buffer op amp will be able to operate. The voltage gain should stay at 110dB. On this instrumentation amplifier, there are 1 circuits that are connected together. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. It is used TR to pack the op amps.
TLV341IDCKTG4 Features
6 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
TLV341IDCKTG4 Applications
There are a lot of Texas Instruments TLV341IDCKTG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- Power control
- Band-pass filter
- Polarized electrodes
- Comparator
- Integrator circuits
- Hand-held batteries
- Weighing systems
- Non-polarized electrodes
- Automotive sensors