TLV3401IDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3401 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 640nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 550nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3401IDBVR Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.A comparator with an output type of CMOS, Open-Drain is being used.The part is shipped by Cut Tape (CT) .The comparator has 5 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator is possible to classify the chip as General Purpose .A total of 1 elements can be found in it.The pinout of the component starts from 5 pins it has.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator is equipped with 5 pins.Search TLV3401 to find more pin-to-pin solutions.There is a quiescent current of 950nA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 640nA for normal use.The compartator could be damaged if the current supply exceeds 550nA .Input current to the device cannot exceed 250pA .According to the voltage formula, the part has a voltage gain of 120dB .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLV3401IDBVR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3401IDBVR Applications
There are a lot of Texas Instruments TLV3401IDBVR linear comparators applications.
- Infotainment & cluster
- Analog front end
- Point of load regulators
- Wireless Base Stations
- Battery-Powered Electronics
- Current and voltage sensing
- Alarm and Monitoring Circuits
- Hand-Held Electronics
- Metering Systems
- Laptop Computers