TLV320AIC25CPFBG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC25 |
| Output | VOLTAGE |
| Pin Count | 48 |
| Power Supplies | 1.83.3V |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 2 |
| Analog Input Voltage-Max | 3V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC25CPFBG4 Overview
Due to space constraints, it is supplied in the 48-TQFP package. We have adopted the packaging method of Tray. It can perform highly efficiently in various applications since it is a type of Voice-Band. This device employs the mounting type Surface Mount. A 0°C~70°C operating performance setting allows it to operate normally. In addition, it is equipped with 2 / 2 ADCs and DACs. Supply voltage 2.7V~3.6V is provided to the analog circuit. 1.65V~1.95V is the supply voltage for the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 48 terminations. 48-pin electronic devices are what it is. The board is configured with 48 pins. More related parts can be found by using its base part number TLV320AIC25. It is mounted to a PCB based on the Surface Mount technology. It is recommended to maintain the maximum supply voltage at 3.6V. Converting analog signals to digital signals requires 2 A/D converters. There is a subcategory of Codecs for this electronic part. A minimum supply voltage of 1.1V should be maintained. A voltage of 1.8V is required to operate the device. A 1.83.3V power supply is needed to operate it. Data transmission is achieved through 2 channels. It is not recommended that the analog input voltage exceeds 3V.
TLV320AIC25CPFBG4 Features
Embedded in the 48-TQFP package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
2 A/D converters
TLV320AIC25CPFBG4 Applications
There are a lot of Texas Instruments TLV320AIC25CPFBG4 CODECs Interface ICs applications.
- Off-Highway Vehicles (OHV)
- Medical & Lab Equipment
- Counting applications
- Radiation therapy
- Speed measurement
- Motor speed /RPM readout
- Converting
- Anomaly detection
- Filling
- Robotic arm positioning