TLV320AIC23PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -10°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV320AIC23 |
| Pin Count | 28 |
| Power Supplies | 1.53.3V |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.42V |
| Number of Bits | 16 |
| Supply Current-Max | 13mA |
| Output Power | 30mW |
| Bandwidth | 96 kHz |
| Data Interface | I2C, Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.42V~3.6V |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 16 b, 20 b, 24 b, 32 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 90 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 100 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC23PW Overview
For space-saving reasons, it is supplied in a 28-TSSOP (0.173, 4.40mm Width) package. The packaging way of Tube is adopted. It can perform highly efficiently in various applications since it is a type of Stereo Audio. It uses a mounting type of Surface Mount. Operating performance at -10°C~70°C makes it possible to operate normally. It is equipped with a total of 2 / 2 ADCs and DACs. In the analog circuit, the supply voltage is 2.7V~3.6V. Supply voltage is set to 1.42V~3.6V for the digital circuit. Transmission lines have 28 terminations to prevent signals from reflecting. Essentially, it is an electronic device with 28 pins. There are 28 pins configured on this board. Find more related parts by using its base part number TLV320AIC23. It is mounted to a PCB based on the Surface Mount technology. Ideally, the supply voltage should remain at 3.6V. Subcategory Other Consumer ICs applies to this electronic part. A minimum supply voltage of 1.42V should be maintained. With a power supply of 1.53.3V, it runs. There are 2 D/A converters used to convert the digital signals into analog signals. Information is stored with 16 bits. The supply current kept below 13mA makes them operate in an easy way.
TLV320AIC23PW Features
Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -10°C~70°C
2 / 2 ADCs / DACs
TLV320AIC23PW Applications
There are a lot of Texas Instruments TLV320AIC23PW CODECs Interface ICs applications.
- Galvanometer scanners
- Oil & gas production
- Autonomous vehicles & robots
- Addition
- Spooling or level wind
- RF-based home automation system
- Backstop gauging
- Counting applications
- Timber products
- Pulp & paper mills