TLV320AIC23BIPWG4
| Parameters | |
|---|---|
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV320AIC23 |
| Pin Count | 28 |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.42V |
| Data Interface | I2C |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.42V~3.6V |
| Power Consumption | 23mW |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of ADC Channels | 1 |
| Resolution (Bits) | 16 b, 20 b, 24 b, 32 b |
| Number of Analog Inputs | 3 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 90 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 100 |
| Number of Analog Outputs | 4 |
| Height | 1.2mm |
TLV320AIC23BIPWG4 Overview
For space-saving purposes, it is packaged in 28-TSSOP (0.173, 4.40mm Width). As a packaging method, Tube is adopted. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. The mounting type of this device is Surface Mount. When the operating performance is set to -40°C~85°C, it can operate normally. The unit is integrated with 2 / 2 ADCs / DACs. Supply voltage 2.7V~3.6V is provided to the analog circuit. It is supplied with a voltage of 1.42V~3.6V to power the digital circuit. To prevent signals from reflecting off of the transmission line, there are 28 terminations. In terms of electronics, it is a 28-pin device. The board is configured with 28 pins. The base part number TLV320AIC23 can be used to find related parts. 3.6V should be the maximum value of the supply voltage. There are 2 A/D converters used to convert the analog signals into digital signals. This electronic part is classified into the subcategory of Other Consumer ICs. It is recommended to maintain a voltage of 1.42V as the minimum value. There are 3 analog inputs on it. There are 4 analog outputs on the board. As far as the analog values can be read at once, this ADC has 1 channels.
TLV320AIC23BIPWG4 Features
Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
3 analog inputs
4 analog outputs
TLV320AIC23BIPWG4 Applications
There are a lot of Texas Instruments TLV320AIC23BIPWG4 CODECs Interface ICs applications.
- CT and MRI scanning machinery
- Full adders
- Linear distance measurement
- X-Y positioning
- Semiconductor fabrication
- Web tensioning
- Translating the decimal values to the binary
- Packaging
- Multi-axis control
- High-performance memory-decoding or data-routing applications