TLV320AIC14IDBTR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLV320AIC14 |
| Output | VOLTAGE |
| Pin Count | 30 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, I2S, Serial |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Mode | SYNCHRONOUS |
| Data Interface | Serial |
| Sampling Rate | 104 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 1 |
| Output Voltage-Max | 2.35V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 87 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 85 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC14IDBTR Overview
For space-saving purposes, it is packaged in 30-TFSOP (0.173, 4.40mm Width). It is adopted to package in the Tape & Reel (TR) way. It can perform highly efficiently in various applications since it is a type of Voice-Band. A mounting type of Surface Mount is used for this device. It is able to operate normally when the operating performance is set at -40°C~85°C. In addition, it is equipped with 1 / 1 ADCs and DACs. The analog circuit is provided with the supply voltage of 2.7V~3.6V. It is supplied with a voltage of 1.65V~1.95V to power the digital circuit. To prevent signals from reflecting off of the transmission line, there are 30 terminations. Essentially, it is an electronic device with 30 pins. The board has 30 pins configured. Its base part number TLV320AIC14 can be used to find other parts that are related. Using the Surface Mount technology, it is mounted to a PCB. 1.95V should be the maximum value of the supply voltage. Analog signals are converted into digital signals by A/D converters. Electronic parts classified as Codecs are located in this subcategory. The minimum value of supply voltage should be maintained at 1.65V. The supply voltage is set to 1.8V. It is designed with 2 channels for data transmission. It is not recommended that the analog input voltage exceeds 2V.
TLV320AIC14IDBTR Features
Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters
TLV320AIC14IDBTR Applications
There are a lot of Texas Instruments TLV320AIC14IDBTR CODECs Interface ICs applications.
- High-performance memory system
- Stagecraft
- Missing value imputation
- Textiles
- Linear measurement
- High-performance memory-decoding or data-routing applications
- Timber products
- CPU memory location identification
- Chemical dosing pumps
- Rotating radar platforms