TLV320AIC1109PBS
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Type | PCM |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC1109 |
| Pin Count | 32 |
| Power Supplies | 3V |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 2.7V |
| Supply Current-Max | 0.008mA |
| Data Interface | PCM Audio Interface |
| Sampling Rate | 8 ksps |
| Voltage - Supply, Analog | 2.7V~3.3V |
| Voltage - Supply, Digital | 2.7V~3.3V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 70 dB |
| Resolution (Bits) | 15 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Companding Law | A/MU-LAW |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLV320AIC1109PBS Overview
For space-saving reasons, it is supplied in a 32-TQFP package. Cut Tape (CT) is the packaging method used. This electronic part is categorized as a type of PCM, making it capable of providing high-efficiency performance in a variety of applications. It uses a mounting type of Surface Mount. Using -40°C~85°C as the operating performance allows it to operate normally. It consists of 1 / 1 ADCs/ DACs. Supply voltage is 2.7V~3.3V for the analog circuit. There is a supply voltage of 2.7V~3.3V provided to the digital circuit. There are 32 terminations used to prevent signals from reflecting off the end of the transmission line. In terms of electronics, it is a 32-pin device. The board is configured with 32 pins. Find more related parts by using its base part number TLV320AIC1109. Mounted on a PCB based on the technology of Surface Mount. The maximum value of supply voltage should be maintained at 3.3V. Analog signals are converted to digital signals by means of 1 A/D converters. The electronic part has been classified as Codecs. Maintaining a minimum voltage of 2.7V is recommended. There is 3V supply voltage for this device. A 3V power supply is needed to operate it. In an easy-to-use manner, they operate when the supply current is kept at 0.008mA.
TLV320AIC1109PBS Features
Embedded in the 32-TQFP package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters
TLV320AIC1109PBS Applications
There are a lot of Texas Instruments TLV320AIC1109PBS CODECs Interface ICs applications.
- Multi-axis control
- Metal forming & fabrication
- Robotics
- Robotics vehicle with the metal detector
- Dimensionality reduction
- Linear distance measurement
- Analog to digital conversion in the analog decoder
- Image compression
- Microprocessor
- Medical industry