TLV3012AIDCKT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3012 |
| Pin Count | 6 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 5μA |
| Output Current | 500μA |
| Max Supply Current | 5μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 5μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 12mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 12mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3012AIDCKT Overview
The product is packaged in 6-TSSOP, SC-88, SOT-363 in order to facilitate transportation.There is a Push-Pull output type for this comparator.This device is designed in Cut Tape (CT) case.There are6 terminals on the comparator.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.It's a typical with Voltage Reference comparator.A total of 1 elements can be found in it.A total of 6 pins are included.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 6 pins on the comparator.You can search TLV3012 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 5μA .There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 5μA for normal use.If the current supply exceeds 5μA , the comparator could malfunction.Input current to the device is limited to 10pA .For normal operation, the operating supply voltage must be 5V .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLV3012AIDCKT Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5μA
TLV3012AIDCKT Applications
There are a lot of Texas Instruments TLV3012AIDCKT linear comparators applications.
- Body Control Modules
- Analog front end
- Wide Range VCO; MOS Clock Timers
- Threshold Detectors
- Industrial
- Infotainment and Clusters
- Multivibrators and High-Voltage Digital Logic Gates
- Point of load regulators
- Battery management and protection
- Lithium ion battery monitoring