TLV3012AIDCKR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28.009329mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3012 |
| Pin Count | 6 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Operating Supply Current | 5μA |
| Output Current | 500μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 5μA |
| Supply Current-Max | 0.005mA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 12mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 12mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3012AIDCKR Overview
In order to facilitate transportation, it is packaged in 6-TSSOP, SC-88, SOT-363 .A comparator with a Push-Pull output is used here.As a result, it is designed with Tape & Reel (TR) package.There are6 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type with Voltage Reference .Electronic comparator consists of 1 elements in total.The device contains 6 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .6 pins are available on the comparator.You can find more pin-to-pin solutions by searching TLV3012 .There is a quiescent current of 5μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.There is sufficient power to run the device from 2/5V power supplies.Electronic comparator is possible to input a maximum current of 10pA into the device.Providing a minimum current of 0.005mA is possible for this part.Often found in ADC circuits, this device is packed in TR .
TLV3012AIDCKR Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5μA
TLV3012AIDCKR Applications
There are a lot of Texas Instruments TLV3012AIDCKR linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Handheld Instruments
- General-Purpose Portable Devices
- General Purpose Low Voltage Applications
- Portable Battery Monitoring
- Motor drives
- System control and monitoring
- Simple Analog-to-Digital Converters (ADCs)
- Metering Systems