TLV3011AIDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV3011 |
| Pin Count | 6 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 5μA |
| Output Current | 500μA |
| Max Supply Current | 5μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 5μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 12mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 12mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3011AIDBVT Overview
Electronic comparator is packaged in SOT-23-6 for convenient transportation.Output type Open Drain is used for this comparator.We ship the part through Tape & Reel (TR) .The device is designed with 6 terminations.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as with Voltage Reference .Electronic comparator consists of 1 elements in total.The device is equipped with 6 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.6 pins are available on the comparator.You can search TLV3011 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 5μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 5μA .An excess of current supply over 5μA could result in malfunction of the comparator.A power supply of 2/5V is sufficient for the operation of the device.Electronic comparator is possible to input up to 10pA current into the device.The device is acceptable to pack by TR .
TLV3011AIDBVT Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
TLV3011AIDBVT Applications
There are a lot of Texas Instruments TLV3011AIDBVT linear comparators applications.
- Limit Comparators
- Building automation
- RC Timers
- Wearable Devices
- Set Top Boxes
- Infotainment and Clusters
- Pulse, Squarewave, and Time Delay Generators
- Power Supervision
- Mobile Phones and Tablets
- Simple Analog-to-Digital Converters (ADCs)