TLV3011AIDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV3011 |
| Pin Count | 6 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 5μA |
| Output Current | 500μA |
| Max Supply Current | 5μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 5μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 12mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 12mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3011AIDBVR Overview
In order to facilitate transportation, it is packaged in SOT-23-6 .The comparator has a type Open Drain output.We ship the part through Tape & Reel (TR) .There are6 terminals on the comparator.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as with Voltage Reference .There are a total of 1 elements in it.Electronic comparator has 6 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator has a pin count of 6 .Try search TLV3011 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 5μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.For normal use of the device, the nominal supply current should be 5μA .Current supply exceeding 5μA could cause disfunction of the compartator.A power supply of 2/5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum current of 10pA into the device.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLV3011AIDBVR Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
TLV3011AIDBVR Applications
There are a lot of Texas Instruments TLV3011AIDBVR linear comparators applications.
- Industrial
- Battery management and protection
- Automatic Test Equipment
- DC/DC and AC/DC power supplies
- Laptop Computers
- Pulse, Squarewave, and Time Delay Generators
- Zero-Crossing Detectors
- Infotainment & cluster
- Factory automation & control
- Alarm and Monitoring Circuits