TLV2704IDG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 1.4μA |
| Max Supply Current | 1.9μA |
| Response Time | 36 μs |
| Slew Rate | 2500 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 73 dB |
| Unity Gain BW-Nom | 5.5 kHz |
| Average Bias Current-Max (IIB) | 0.0017μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Input Offset Voltage-Max | 6000μV |
| Wideband | NO |
| Power | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.905mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV2704IDG4 Overview
For convenience, it is packaged in SOIC .There are 14 terminals on the comparator.The electrical component in this case belongs to the Operational Amplifier families.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.A total of 14 pins are included.14 pins are available on the comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 1.4μA .If the current supply exceeds 1.9μA , the comparator could malfunction.There is no recommendation for temperatures higher than 125°C .Comparator electronics will not be able to function at temperatures below -40°C .A comparator is designed to operate at a maximum supply voltage of 16V .This comparator can be supplied with a voltage as low as 2.5V .To ensure a high level of output quality, 4 channels work together.Comparator electronics consists essentially of a high gain OPERATIONAL AMPLIFIER amplifier.Comparator electronics is acceptable to pack the device by TUBE .
TLV2704IDG4 Features
OPERATIONAL AMPLIFIER amplifier
TLV2704IDG4 Applications
There are a lot of Texas Instruments TLV2704IDG4 linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Point of load regulators
- General-Purpose Portable Devices
- Limit Comparators
- System control and monitoring
- Set Top Boxes
- Battery management and protection
- Current and voltage sensing
- Factory automation & control
- Notebooks and PDAs