TLV2624IDR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2624 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 2.75V |
| Power Supplies | 3/5V |
| Number of Circuits | 4 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 4mA |
| Output Current | 28mA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 28mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 11MHz |
| Unity Gain BW-Nom | 11000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 11MHz |
| Max I/O Voltage | 3.5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2624IDR Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Cut Tape (CT) case. We are approaching the 14h termination of the year. There are a total of 14 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 14 pins. Op amp ic rates 250μV for input offset voltage. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 800μA . 100dB should be the voltage gain. During the manufacturing process, this buffer amplifier is divided into 4 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 2.75V. To pack the operational amplifier ics, TR is adopted as the packing method.
TLV2624IDR Features
14 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
TLV2624IDR Applications
There are a lot of Texas Instruments TLV2624IDR Instrumentational OP Amps applications.
- Division circuits
- Weighing systems
- Multimedia playback equipment
- Navigation
- Power generator
- Portable docking station
- Laptop
- Medical instruments
- PDA
- Vehicle electronics