TLV2461CP

TLV2461CP

1 Channels 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.025μA 3V 2.7V~6V ±1.35V~3V TLV2461 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-TLV2461CP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 513
  • Description: 1 Channels 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.025μA 3V 2.7V~6V ±1.35V~3V TLV2461 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 2.54mm
Base Part Number TLV2461
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 3V
Number of Channels 1
Operating Supply Current 550μA
Nominal Supply Current 650μA
Power Dissipation 1.2W
Output Current 80mA
Slew Rate 1.6V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 66 dB
Current - Input Bias 1.3nA
Voltage - Supply, Single/Dual (±) 2.7V~6V ±1.35V~3V
Output Current per Channel 80mA
Input Offset Voltage (Vos) 2mV
Bandwidth 5.2MHz
Gain Bandwidth Product 6.4MHz
Unity Gain BW-Nom 6400 kHz
Voltage Gain 109dB
Average Bias Current-Max (IIB) 0.025μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 6V
Voltage - Input Offset 500μV
Low-Bias NO
Micropower NO
Programmable Power NO
Max I/O Voltage 2mV
Input Offset Current-Max (IIO) 0.007μA
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV2461CP Overview


It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 3V volts. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 2mV voltage. This electrical part should be mounted using type Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Using a supply current of 550μA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 109dB at all times. As far as the device is concerned, buffer amplifier has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage.

TLV2461CP Features


8 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail

TLV2461CP Applications


There are a lot of Texas Instruments TLV2461CP Instrumentational OP Amps applications.

  • Hand-held batteries
  • Portable electronic products powered by batteries
  • Strain gauges
  • Proportional counter tubes
  • Test equipment
  • pH (acidity)
  • Laptop
  • Power generator
  • High/low-pass filter circuit
  • Video computer boards

Write a review

Note: HTML is not translated!
    Bad           Good