TLV2450CDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV2450 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Operating Supply Current | 23μA |
| Nominal Supply Current | 42μA |
| Power Dissipation | 425mW |
| Output Current | 10mA |
| Slew Rate | 0.11V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V ±1.35V~3V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 220 kHz |
| Unity Gain BW-Nom | 220 kHz |
| Voltage Gain | 103dB |
| Average Bias Current-Max (IIB) | 0.007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 300μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.005μA |
| Programmable Power | NO |
| Max I/O Voltage | 1.5mV |
| Input Offset Current-Max (IIO) | 0.00045μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2450CDBVR Overview
Op amp is packaged in SOT-23-6 case. There are two types of operational amplifiers in this circuit. A Cut Tape (CT) case is used for delivering the op amp. It is estimated that there will be 6 terminations in the next few months. Buffer amplifier has a total of 6 pins on it. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 6 pins. Op amp ic rates 1.5mV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at 0°C~70°C. Operational amplifier can operate supply current at 23μA. Maintain 103dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The linear amplifier consists of 1 different elements in total. The operating supply voltage of instrumentation amplifier is rated 3V voltage. As a result of this, the buffer amplifier is packed in TR.
TLV2450CDBVR Features
6 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2450CDBVR Applications
There are a lot of Texas Instruments TLV2450CDBVR Instrumentational OP Amps applications.
- Band-pass filter
- Biopotential
- Industrial applications including automation
- Hand-held batteries
- Instrumentation
- Wireless base stations
- Weak signal detection
- PDA
- Fast A/D and D/A converters
- Comparator