TLV2322IP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TLV2322 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 34μA |
| Power Dissipation | 1W |
| Output Current | 30mA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.6pA |
| Voltage - Supply, Single/Dual (±) | 2V~8V ±1V~4V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 9mV |
| Bandwidth | 27 kHz |
| Gain Bandwidth Product | 85kHz |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 114.32dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 1.1mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 9mV |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2322IP Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. Op amp rates 9mV as input offset voltage. This electrical part should be mounted using type Through Hole. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 20μA . It is recommended to keep the voltage gain at 114.32dB at all times. A total of 2 elements are present in this linear amplifier. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLV2322IP Features
8 Pins
supply voltage of 3V
114.32dB voltage gain
TLV2322IP Applications
There are a lot of Texas Instruments TLV2322IP Instrumentational OP Amps applications.
- Television
- Vehicle electronics
- Signal transformation
- Division circuits
- Portable media players
- Weighing systems
- Medical imaging
- Power transmission
- Cinema or auditorium audio system
- Power generator