TLE7237SL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 24 |
| Packaging | Tape & Reel |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Max Output Current | 260mA |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 8 |
| Interface | SPI, Serial |
| Quiescent Current | 10A |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 52V |
| Max Dual Supply Voltage | 52V |
| Driver Number of Bits | 8 |
| Fault Protection | Over Temperature |
| Screening Level | AEC-Q100 |
| Turn On Time | 100 µs |
| Output Peak Current Limit-Nom | 0.38A |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 100 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Supply Voltage1-Min | 5.5V |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLE7237SL Overview
The SSOP package contains it.In the current state, 8 channels are accessible.The package resembles a Tape & Reel.Hot-swappable device has a total of 24 terminations.Device DUAL is in the terminal position.The device consists of a total of 24 pins.A supply voltage of 5V allows for high efficiency.Hot-swappable device is necessary to use 24 pins in order to operate the device.The gadget in Peripheral Drivers is self-contained.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.Operating at 150°C°C allows for stable operation.Maintaining reliability requires a minimum working temperature of -40°C degrees Celsius.For normal operation, Vsup should be maintained above 3V.In terms of power supplies, it is the character 3.3/5V that appears on the part.Maximum output current drops to 260mA to meet operation criteria.
TLE7237SL Features
The terminal position of 24
TLE7237SL Applications
There are a lot of Infineon Technologies TLE7237SL hot swap controllers applications.
- Datacom
- Loads
- PC board hot swap insertion and removal
- Power monitoring
- Storage network
- Current limit and current foldback limit functions
- Network switches
- Switch
- CompactPCI
- Base station power distribution system