TLE2141CD
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2141 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Channels | 1 |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 4.5mA |
| Output Current | 50mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1.4mV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 5.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 106.85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 1.4mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2141CD Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tube case. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 1.4mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.5mA and 10 . The voltage gain should stay at 106.85dB. 1 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 22V. Excalibur? corresponds to linear amplifier's series.
TLE2141CD Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2141CD Applications
There are a lot of Texas Instruments TLE2141CD Instrumentational OP Amps applications.
- Power transmission
- Commercial audio systems
- Medical instruments
- Automatic control
- Multimedia playback equipment
- Band-stop filter
- Communication
- Video conversion and routing
- Test equipment
- single/dual op amp sum and difference circuits