TLE2037CDR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2037 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 5.3mA |
| Power Dissipation | 725mW |
| Slew Rate | 7.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 8V~38V ±4V~19V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 153.06dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Voltage - Input Offset | 20μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 50MHz |
| Max I/O Voltage | 100μV |
| Input Offset Current-Max (IIO) | 0.09μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2037CDR Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. The input offset voltage is 100μV. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 3.8mA and 10 . There should be no change in the voltage gain. There is a rating of 1 for the operating supply voltage of the buffer op amp. This linear amplifier pack is based on the TR axis. Excalibur? corresponds to linear amplifier's series.
TLE2037CDR Features
8 Pins
supply voltage of 15V
153.06dB voltage gain
TLE2037CDR Applications
There are a lot of Texas Instruments TLE2037CDR Instrumentational OP Amps applications.
- Portable media players
- Power generator
- Thermocouples
- Video data acquisition
- Fission chambers
- Inverse/same-phase proportional circuit
- Information processing
- Laptop
- Broadcasting
- Exponential operation circuits